Lenovo ThinkServer TD200 Installation And User Manual page 149

1
Bezel
2
Hinge assembly
3
Retention tabs
2. Push the hinges into the holes on the chassis until they snap into place.
3. If however, the bezel was removed by detaching the sliding hinge mount from
the hinge assembly (using the breakaway method as the bezel was designed to
do), do the following to reattach the bezel:
a. Press in on the rear of the sliding hinge mount until it extends beyond the
edge of the bezel and hold it in place.
Chapter 5. Installing optional devices and replacing customer replaceable units
131