Lenovo ThinkServer TD200 Installation And User Manual page 119

1
DIMM 9 (reserved)
2
DIMM 10
3
DIMM 11
4
DIMM 12 (reserved)
5
DIMM 13
6
DIMM 14
7
DIMM 15
8
DIMM 16
9
DIMM 8
10
DIMM 7
11
DIMM 6
12
DIMM 5
13
DIMM 4 (reserved)
14
DIMM 3
To install an additional microprocessor, do the following:
1. Read the safety information (see "Safety" on page vii and "Installation
guidelines" on page 37).
2. Turn off the server and disconnect all power cords and external cables (see
"Turning off the server" on page 35); then, unlock and remove the server cover
(see "Removing the side cover" on page 43).
3. Rotate the power-supply cage assembly out of the chassis. Lift up the
power-supply cage handle and pull the power-supply cage assembly all the
way up until the retainer latch locks the cage in place on the chassis.
Chapter 5. Installing optional devices and replacing customer replaceable units
15
DIMM 2
16
DIMM 1 (reserved)
17
Battery
18
PCI extender card connector
19
Microprocessor 1
20
Microprocessor 2
21
Slot 6, PCI 32 bit/33 MHz
22
Slot 5, PCI Express Gen2 x8 (x8)
23
Slot 4, PCI Express Gen2 x8 (x4)
24
Slot 3, PCI Express Gen2 x8 (x4)
25
Slot 2, PCI Express Gen2 x18 (x8)
26
Slot 1, PCI Express Gen2 x8 (x8)
27
Virtual media key connector
28
Optional VRM connector
101