Fujitsu SRS-9924 User Manual page 7

Conventions and Layout
• In procedures, the required actions are noted, with the buttons you
press in capital letters, such as HOLD or REDIAL.
• Other important words, such as messages that appear on the display,
also appear in CAPITAL LETTERS.
• Some procedures use the following symbol to indicate which buttons
to press.
ENTER
• Call Appearance and Directory Number are abbreviated as CA and
DN.
Menus or screen displays appear as text in boxes.
12:05PM
UNA
Actions that pertain to only a specific type of ISDN (either National or
Custom) or to a particular phone system have the following format or
symbols inserted. These symbols appear in the section heading when
the information applies entirely to that system, or they appear adjacent
to a command where only a specific action applies to that system.
5E Custom Only
National ISDN Only
Instructions pertaining to either NI only or 5E Custom only appear in a
shaded area on the page.
For specific instructions for National ISDN, these symbols are used:
<5ESS> ................................... Required for Lucent Systems.
<DMS-100> ............................ Required for Nortel Systems.
<EWSD> ................................. Required for Siemens Systems.
Note: 5ESS, DMS-100, and EWSD are registered trademarks of Lucent,
Nortel, and Siemens Information and Communication Networks
respectively.
Features or instructions that pertain to only a specific terminal have the
following symbols inserted.
FRI JAN 15
L-DIR CLEAR OPTIONS
5