3
Selecting
Ringer Pattern
Selecting
Ringer Pattern
Mode
3-16
ENTER
2.
3. Press the desired tone number. The phone rings
once at the selected tone.
4. When you hear a tone you like, press ENTER.
The following screen is shown:
Select either normal ring or silent ring. Silent ring
flashes the LED of the receiving DN or CA button
without ringing the bell.
To set the ringer mode, enter Ringer Service Mode
then choose option 3:
3
ENTER
1.
ENTER
2.
3. Press the ringing option, then ENTER. The
following screen is shown:
To change another setting, you can press asterisk
(*) to return to the menu mode options.
This selection determines the type of ring that
announces incoming calls when you are talking on
another line.