Pnp/Pci Configuration - Asus PC-DL Deluxe User Manual

4.4.3 PnP/PCI Configuration

Reset Configuration Data
Resources Controlled By
IRQ Resources
PCI/VGA Pallete Snoop
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin 3 Assignment
INT Pin 4 Assignment
INT Pin 5 Assignment
INT Pin 6 Assignment
INT Pin 7 Assignment
INT Pin 8 Assignment
Reset Configuration Data [Disabled]
This item allows you to enable or disabled resetting of the Extended
System Configuration Data (ESCD) when you exit the Setup. The ESCD
includes information on non-PnP devices. Set this item to [Enabled] if you
installed an expansion card that conflicts with other devices and cause
system boot failure. Configuration options: [Disabled] [Enabled]
Resources Controlled By [Auto(ESCD)]
Configuration options: [Auto(ESCD)] [Manual]
PCI/VGA Pallete Snoop [Disabled]
Some non-standard VGA cards, like graphics accelerators or MPEG video
cards, may not show colors properly. Setting this field to [Enabled] corrects
this problem. If you are using a standard VGA card, leave this field to the
default setting [Disabled]. Configuration options: [Disabled] [Enabled]
INT Pin 1~8 Assignment [Auto]
Allows you to select the appropriate interrupt to the specific devices to
avoid conflict. Configuration options: [Auto] [3] [4] [5] [7] [9] [10] [11] [12]
[14] [15]
ASUS PC-DL Deluxe motherboard
PnP/PCI Configuration
[Disabled]
[Auto(ESCD)]
[Disabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
4-21