Resetting A Raid To Non-Raid - Asus PC-DL Deluxe User Manual

5.5.6 Resetting a RAID to non-RAID

Take caution when resetting a RAID to non-RAID. Resetting all RAID
data will remove any internal RAID structures from all RAID disks!
Intel(R) Integrated RAID for Serial ATA - RAID Configuration Utility
Copyright(C) 2003 Intel Corporation. All Rights Reserved. v3.x.x.xxxx
RAID Volumes:
None defined.
Non-RAID Disks:
Port Drive Model
To reset a RAID to non-RAID structure:
1. Select the option 3. Reset Disks to Non-RAID and press <Enter>.
2. When a confirmation message appears, press Y to revert to non-
RAID hard disk structure.
5-22
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RaID
4. Exit
[ DISK/VOLUME INFORMATION
Serial #
0 ST320413A xxxxxxxx
1 ST320413A xxxxxxxx
[ [ ]-Select ]-Select [ESC] Exit [ESC] Exit
[ RESET ALL DATA RAID DATA
Resetting all RAID data will remove any internal RAID structures
from all RAID disks, including disks with working volumes. These
structures are used to maintain the RAID volumes. By removing
these structures, the drive will revert back to a Non-RAID disk
that can then be used or reallocated to a new RAID volume.
WARNING: Selecting "Yes" will cause all data on any RAID disk
(RAID Volume or Other RAID Disk) to be lost.
Are you sure you want to destroy all RAID data (Y/N):
[ MAIN MENU ]
]
Size Status
18.6GB Normal
18.6GB Normal
[Enter]-Select Menu [Enter]-Select Menu
]
Chapter 5: Driver installation
Bootable
Yes
Yes