Expansion Cards; Expansion Card Installation Procedure - Fujitsu Siemens Computers D1241 User Manual

3. HARDWARE SETUP

3.7 Expansion Cards

WARNING!
Unplug your power supply when adding or removing expansion
cards or other system components. Failure to do so may cause severe damage to
both your motherboard and expansion cards.

3.7.1 Expansion Card Installation Procedure

1. Read the documentation for your expansion card and make any necessary hard-
ware or software settings for your expansion card, such as jumpers.
2. Remove your computer system's cover and the
bracket plate on the slot you intend to use.
Keep the bracket for possible future use.
3. Carefully align the card's connectors and press
firmly.
4. Secure the card on the slot with the screw you
removed above.
5. Replace the computer system's cover.
6. Set up the BIOS if necessary
(see 4.4.3 PCI Configuration)
7. Install the necessary software drivers for your
expansion card.
Peer-to-Peer PCI Bus Configuration Diagram
Peer-to-Peer PCI Bus
Configuration Diagram
Secondary PCI Bus (66/33MHz)
PCI-5 PCI-6
64-bit 64-bit
33MHz 33MHz
33MHz 33MHz
66MHz 66MHz
20
Socket 370
CNB30LE
LSI SCSI
PCI-7
32-bit
33MHz <896
33MHz <53C1010-33
PCI-1
(none)
<53C1010-66
32-bit
User's Manual
Socket 370
MA
Cntl
RCC
Buffer DIMM
MD
100/133MHz
Primary PCI Bus (33MHz)
PCI-2 PCI-3 PCI-4
32-bit 32-bit 32-bit
Intel 82559
ATI RageXL