Layout Contents - Fujitsu Siemens Computers D1241 User Manual

3. HARDWARE SETUP

3.2 Layout Contents

Expansion Slots
1) DIMM 0/1/2/3
2) CPU
3) PCI1/PCI2/PCI3/PCI4/PCI7 p.20 32-bit PCI Bus Expansion Slots (PCI7 depends on model)
4) PCI5/PCI6
Connectors
1) PS2KBMS
2) PS2KBMS
3) USB
4) LAN
5) PRINTER
6) COM1/COM2
7) VGA
8) USBPORT
9) CHASSIS
10) FLOPPY
11) IDE1/IDE2
12) WOL_CON
13) WOR
14) IDELED
15) CPU_FAN1/2,CHA_FAN1/2 p.28 CPU and Chassis Fan Connectors (Four 3-pin)
16) SMB
17) NIC (PANEL)
18) STATUS (PANEL)
19) SMI (PANEL)
20) PWRSW (PANEL)
21) CHASSIS (PANEL)
22) RESET (PANEL)
23) PWR.LED (PANEL)
24) NMI (PANEL)
25) SPEAKER (PANEL)
26) IDELED (PANEL)
27) ATXPWR
28) SCSI-A/SCSI-B
p.17 168-Pin System Memory Support
p.19 Central Processing Unit (CPU)
p.20 64-/32-bit PCI Bus Expansion Slots (depending on model)
p.22 PS/2 Mouse Connector (6-pin female)
p.22 PS/2 Keyboard Connector (6-pin female)
p.23 Universal Serial Bus Ports 0 & 1 (Two 4-pin female)
p.23 Fast-Ethernet Connector (RJ45)
p.23 Parallel Port Connector (25-pin female)
p.23 Serial Port COM1/COM2 Connectosr (Two 9-pin male)
p.24 Monitor (VGA) Output Connector (15-pin female)
p.24 Universal Serial Bus Port (10-1 pins)
p.25 Chassis Intrusion Connector (4-1 pins)
p.25 Floppy Disk Drive Connector (34-1 pins)
p.26 Primary/Secondary IDE Connectors (Two 40-1 pins)
p.27 Wake-On-LAN Connector (3 pins)
p.27 Wake-On-Ring Connector (2 pins)
p.28 IDE/SCSI Activity LED (2 pins)
p.29 SMBus Connector (5-1 pins)
p.29 NIC Activity LED (2 pins)
p.29 Status Activity LED (2 pins)
p.29 System Management Interrupt Switch Lead (2 pins)
p.30 ATX Power / Soft-Off Switch Lead (2 pins)
p.30 Chassis Intrusion Connector (2 pins)
p.30 Reset Switch Lead (2 pins)
p.30 System Power LED Lead (3-1 pins)
p.30 Non-Mask Interrupt Switch (2 pins)
p.30 System Warning Speaker Connector (4 pins)
p.30 IDE/SCSI Activity LED (2 pins)
p.31 ATX Power Supply Connector (20 pins)
p.31 68-pin Ultra160/Ultra2 SCSI Connectors (Two 68 pins)
User's Manual 15