Active Sessions - D-Link DI-704GU User Manual

Section  - Configuration
Internal:
The IP address and port number of the
LAN-side application.
Protocol:
The communications protocol used for the
conversation.
External:
The IP address and port number of the
WAN-side application.
NAT: The port number of the LAN-side application
as viewed by the WAN-side application.
Priority:
The preference given to outbound packets
of this conversation. Smaller numbers
represent higher priority.
State:
When SPI (Stateful Packet Inspection) is
enabled, this is the state for sessions that
use the TCP protocol.
Dir:
The direction of initiation of the conversation:
Egress: Initiated from LAN to WAN.
Ingress: Initiated from WAN to LAN.
Time Out:
The number of seconds of idle time until the router considers the session terminated.
D-Link DI-704GU User Manual

Active Sessions

4