Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Manual
This product can be set up
using any current Web browser,
i.e., Internet Explorer or
Netscape Navigator.
Before You Begin
1. If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).
2. It is best to use the same computer that is connected to your modem for
configuring the DI-704UP Broadband Router. The DI-704UP acts as a DHCP server
and will assign all the necessary IP address information on your network. See
Appendix at the end of this Quick Installation Guide or the Manual on the CD-
ROM for setting each network adapter to automatically obtain an IP address.
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
DI-704UP Ethernet Broadband Router
and USB Print Server
CD-ROM (containing Manual, Warranty and
Print Server Software for Windows)
Ethernet (Straight-Through) Cable
5V AC Power Adapter
specifications subject to change without notice. DI-704UP. 08152003
Ethernet Broadband Router
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
1
DI-704UP
and USB Print Server
Advertisement
Table of Contents
Related Manuals for D-Link DI-704UP
Summary of Contents for D-Link DI-704UP
-
Page 1: Before You Begin
If any of the above items are missing, please contact your reseller. ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DI-704UP. 08152003... - Page 2 First, connect the power adapter to the receptor at the back panel of the DI-704UP and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED lights up indicating proper operation.
-
Page 3: Restart Your Computer
Connecting Additional Computers To The DI-704UP Using additional Ethernet (CAT5 UTP) cables, connect your Ethernet-equipped computers to the remaining Ethernet LAN ports on the back panel of the DI-704UP Status LED – flashes consistently to indicate that the DI-704UP is working properly. -
Page 4: Using The Setup Wizard
When you have completed the steps in this Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “http://192.168.0.1” into the URL address box. Then press the Enter or Return key. The logon pop-up screen appears. - Page 5 The Setup Wizard (continued) Once logged in, the Home screen appears. Click Run Wizard You will see the following screens Click Next Set up your new password. You have the option to establish a password. Click Next...
- Page 6 The Setup Wizard (continued) Choose your time zone down list. Click Next The Router will attempt to auto-detect your Internet connection and bring up the appro- priate screen. If it cannot auto-detect the Internet connec- tion, the WAN selection screen appears. Select your Internet Connection.
- Page 7 The Setup Wizard (continued) If you selected Dynamic IP screen appears: (Used mainly for Cable Internet service.) Click the “Clone MAC Address” button to automatically copy the MAC address of the network adapter in your computer. You can also manually type in the MAC address.
-
Page 8: Test Internet Connection
Your Setup is Complete! Click Restart Test Internet Connection. Once returned to the Home tab, close the web browser. Click to Exit Relaunch your Web browser (i.e., Internet Explorer or Netscape Navigator), to link to your favorite Web site to test your Internet connection. -
Page 9: Installing The Print Server Software
APPENDIX Installing the Print Server Software Insert the installation CD-ROM into the CD-ROM drive. The following window appears automatically. If not, please run “autorun.exe” on the CD-ROM. Click Install Print Server Software Select your Windows operating system Wait until the following Welcome dialog appears. Click Next Select the destination folder. -
Page 10: Configuring On Windows 98Se/Me Platforms
DI-704UP. On a Windows 95/98 platform, open the Printers window in the My Computer menu. Now, you can configure the print server of the DI-704UP: Find out the corresponding icon of your printer, for example, the Epson Sylus C60. Right click on that icon, and then select Properties. -
Page 11: Configuring On Windows 2000/Xp Platforms
Configuring on Windows 98SE/Me Platforms (continued) Click on the Details tab Choose the “D-Link LPT Port (Print Server)” from the list attached at the Print To the following port. Be sure that the Printer Driver item is configured to the correct driver of your printer. - Page 12 To connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an IP address automatically for the DI-704UP Broadband Router. Microsoft Windows XP: Right click on My Network Places select Properties >...
- Page 13 Apple Macintosh OS X: Go to the Apple Menu Click on Preferences and Select Select Built-in Ethernet in the show pull down menu Select Using DHCP the Configure pull down menu Click on Apply Now The IP address information, the Subnet Mask, the Router’s IP address and the Ethernet adapter address appears.
- Page 14 Notes...
- Page 15 Notes...
-
Page 16: Technical Support
You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.