Pppoe - D-Link DI-704GU User Manual

Section  - Configuration

PPPoE:

Select this option if your ISP requires you to
use a PPPoE (Point to Point Protocol over
Ethernet) connection. DSL providers often use
this option. This method of connection requires
you to enter a Username and Password
(provided by your Internet Service Provider)
to gain access to the Internet.
Note: When using the PPPoE option, you will
need to ensure that any PPPoE client software
on your computers is removed or disabled.
Dynamic IP/Static IP: If your ISP has assigned a fixed IP address,
select Static IP and enter the fixed IP address in
the IP address field. If the ISP's servers assign
these values upon establishing a connection,
select Dynamic IP.
When required, this value is provided by the
IP Address:
ISP.
This value is provided as part of the agreement
Username:
between you and the ISP.
This value is provided as part of the agreement
Password:
between you and the ISP.
Re-enter the password.
Verify Password:
Service Name is optional, but may be required
Service Name:
by some ISPs. If your ISP provides a Service
Name, enter it here.
D-Link DI-704GU User Manual
PPPoE