Table of Contents
Advertisement
Section - Configuration
Enabled/
Enable this option only if you have purchased
Disabled:
your own domain name and registered with a
dynamic DNS service provider. The following
parameters are active when the option is
enabled.
Server Address:
Select a dynamic DNS service provider from
the pull-down list.
Host Name:
Enter your entire host name; for example:
myhost.mydomain.net.
Username or Key:
Enter the username or key provided by your
service provider. If the Dynamic DNS provider
supplies only a key, enter that key in all three
fields.
Password or Key:
Enter the password or key provided by your
service provider. If the Dynamic DNS provider
supplies only a key, enter that key in all three
fields.
Verify Password
Re-type the password or key provided by your service provider. If the Dynamic DNS provider supplies only a key, enter
or Key:
that key in all three fields.
Note: If a dynamic DNS update fails for any reason (if, for example, incorrect parameters are entered), the router
automatically disables the Dynamic DNS feature and records the failure in the log.
Note: After configuring the router for Dynamic DNS, you can open a browser and navigate to the URL for your domain
(for example http://www.mydomain.info) and the router will attempt to forward the request to port 80 on your LAN. If,
however, you do this from a LAN-side computer and there is no virtual server defined for port 80, the router will return
to the router's configuration home page. Refer to the Advanced -> Virtual Server configuration page to set up a virtual
server.
D-Link DI-704GU User Manual
DDNS
Advertisement
Table of Contents
