Lan - D-Link DI-704GU User Manual

Section  - Configuration
IP Address:
The IP address of your router on the local
area network. Your local area network settings
are based on the address assigned here. For
example, 192.168.0.1.
Subnet Mask:
The subnet mask of your router on the local
area network.
Local Domain
This entry is optional. Enter a domain name
Name:
for the local network. The DHCP server will
give this domain name to the computers
on the LAN. So, for example, if you enter
mynetwork.net here, and you have a PC
with a name of chris, that PC will be known
as chris.mynetwork.net. Note, however, if
the router's WAN settings specify Dynamic
IP Address, and the ISP's DHCP server
assigns a domain name to the router, that
domain name will override any name you
enter here.
Enable RIP:
Enable RIP if required by the ISP, if the LAN
has multiple routers, or if the LAN has auto-
IP devices.
RIP Operating
This router supports both version 2 and
mode:
version 1 of the RIP specification.
V1. Use if none of the routers supports version 2.
V2 Broadcast. Use if some routers are capable of version 2, but some are only capable of version 1.
V2 Multicast. Use if the DI-704GU is the only router on the LAN or if all routers on the LAN support version 2.
D-Link DI-704GU User Manual

LAN