Fujitsu MHV2060AT Product Manual page 156

Interface
Bit 14-8: Undefined
Bit 7:
Bit 6:
Bit 5-3:
Bit 2:
Bit 1-0:
*2 Word 1, 3, 6, 60-61
Word MHV2120AT
1 X ' 3FFF '
3 X ' 10 '
6 X ' 3F '
60-61 X ' DF94BB0 '
*3 Status of the Word 2 Identify information is shown as follows:
37C8h
738Ch
8C73h
C837h
Others
*4 Word 49: Capabilities
Bit 15-14: Reserved
Bit 13:
Bit 12:
Bit 11:
Bit 10:
Bit 7-0:
Bit 8:
Bit 9:
5-80
Removable disk drive = 1
Fixed drive = 1
Undefined
IDENTIFY DEVICE
Reserved
MHV2100AT MHV2080AT
X ' 3FFF ' X ' 3FFF '
X ' 10 ' X ' 10 '
X ' 3F ' X ' 3F '
X ' BA52230 ' X ' 950F8B0 '
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
The device requires the SET FEATURES sub-command after the
power-on sequence in order to spin-up. The Identify information
is incomplete.
Reserved
1= Support the standby timer the same as the ATA standard.
Reserved
1 = Supported
0 = Disable inhibition
Undefined
1 = LBA Supported
1 = DMA Supported
Valid = 0
MHV2060AT MHV2040AT
X ' 3FFF '
X ' 10 '
X ' 3F '
X' 6FC7C80' X ' 4A85300 '
X ' 3FFF '
X ' 10 '
X ' 3F '
C141-E218