Table 5.20 Selective Self-Test Feature Flags - Fujitsu MHV2060AT Product Manual

• Feature flags
Bit
0 Vendor specific (unused)
1 When set to one, perform off-line scan after selective test
2 Vendor specific (unused)
3 When set to one, off-line scan after selective test is pending.
4 When set to one, off-line scan after selective test is active.
5...15 Reserved
Bit [l] shall be written by the host and returned unmodified by the device. Bit
[3:4] shall be written as zeros by the host and the device shall modify them as the
test progress.
Selective self-test pending time [min]
•
The selective self-test pending time is the time in minutes from power-on to the
resumption of the off-line testing if the pending bit is set.
C141-E218

Table 5.20 Selective self-test feature flags

Description
5.3 Host Commands
5-57