Fujitsu MHT2080BH Product Manual page 165

*8 Word 59: Transfer sector count currently set by READ/WRITE
Bit 15-9:
Bit 8:
Bit 7-0:
*9 Word 63: Multiword DMA transfer mode
Bit 15-11: Reserved
Bit 10:
Bit 9:
Bit 8:
Bit 7-3:
Bit 2:
Bit 1:
Bit 0:
*10 Word 64: Advance PIO transfer mode support status
Bit 15-8:
Bit 7-0:
Bit 1:
Bit 0:
*11 WORD 75: X ' 001F ' (32)
*12 WORD 76
Bit15-10: Reserved
Bit 9:
Bit 8:
Bit 7-4:
Bit 3:
Bit 2:
Bit 1:
Bit 0: Reserved
C141-E203-01EN
MULTIPLE command
Reserved
'1' = Enable the multiple sector transfer
Transfer sector count currently set by READ/WRITE MULTIPLE
command without interrupt supports 2, 4, 8 and 16 sectors.
'1' = multiword DMA mode 2 is selected.
'1' = multiword DMA mode 1 is selected.
'1' = multiword DMA mode 0 is selected.
Reserved
'1' = Multiword DMA mode 2, 1, and 0 supported (Bit 1 = 0 = '1')
'1' = Multiword DMA mode 1, and 0 supported (Bit 0 = '1')
'1' = Mode 0
Reserved
Advance PIO transfer mode
'1' = Mode 4 supported
'1' = Mode 3 supported
'1' = Supports the Power Management initiation request from
the host system.
'1' = Supports the Native command queueing.
Reserved
Reserved for SATA
'1' = Supports the Gen-2 signaling rete.
'1' = Supports the Gen-1 signaling rete.
5.3 Host Commands
5-91