Table 3.7 Logical Specification Type Setting - Fujitsu MCM3064SS Product Manual

Installation Requirements
(3) SCSI type 0
The command specification and message specification are specified. The SCSI-1
specification is compatible with that of the old unit (M2511A). Table 3.7 shows
the command and message specification settings.
Command specification and message specification
* Setting when shipped
3-24

Table 3.7 Logical specification type setting

SCSI-2 specification
SCSI-1 specification
CNH 2/Pin 14 - GND
Open*
Short
C156-E228-02EN