Operation and Cleaning
Figure 5.7 Setting an optical disk cartridge into the setting case
3) Place the setting case cover over the cartridge while inserting the disk
revolving knob pin into the center hub of the cartridge (see Figure 5.8).
Disk revolving knob
Setting case cover
4) When wiping the disk, remove from the disk surface any fragments that may
damage it.
5) Moisten the accessory cleaning cloth with a few drops of the cleaning
solution.
5-12
Shutter
Spindle
Setting case lid
Disk damage: Do not press hard or apply excessive shock to an
optical disk cartridge case while setting it in the setting case.
Figure 5.8 Placing the setting case cover
Cartridge
Optical disk
Shutter stopper
Setting case
Optical disk
Cartridge opening
Optical disk hub
C156-E228-02EN