Rear Panel; Dgs-1100-24; Front Panel - D-Link EasySmart DGS-1100-08P Manual

Rear Panel

Power: The power port is where to connect the AC power cord.

DGS-1100-24

24-Port 10/100/1000Mpbs EasySmart Switch

Front Panel

Power LED: The Power LED lights up when the Switch is connected to a power source.
Link/Act/Speed LED (Ports 1-24):
Flashing: Indicates a network link through the corresponding port.
Blinking: Indicates that the Switch is either sending or receiving data to the port.
Green: Indicates that the port is running at 1000M.
Amber: Indicates that the port is running at 10/100M.
Light off: No link.
Reset: Press the reset button for 5 seconds to reset the Switch back to the default settings. All previous
changes will be lost.
Rear Panel
Power: Connect the supplied AC power cable to this port.
Figure 8– DGS-1100-16 Rear Panel
Figure 9 – DGS-1100-24 Front Panel
Figure 10– DGS-1100-24 Rear Panel
5
5
D-Link EasySmart Switch User Manual