L2 Features > Cable Diagnostics - D-Link EasySmart DGS-1100-08P Manual

D-Link EasySmart Switch User Manual
Figure 172– L2 Features > Statistics menu
Refresh All: Renews the details collected and displayed.
Clear All Counters: To reset the details displayed.
TxOK: Number of packets transmitted successfully.
RxOK: Number of packets received successfully.
TxError: Number of transmitted packets resulting in error.
RxError: Number of received packets resulting in error.
L2 Features > Cable Diagnostics
The Cable Diagnostics is designed primarily for administrators and customer service representatives to
examine of the copper cable quality. It rapidly determines the type of cable errors occurred in the cable.
Select a port and then click the Test Now button to start the diagnosis.
Figure 183– L2 Features > Cable Diagnostics
Test Result: The description of the cable diagnostic results.
•OK means the cable is good for the connection.
•Short in Cable means the wires of the RJ45 cable may be in contact somewhere.
•Open in Cable means the wires of RJ45 cable may be broken or the other end of the cable is simply
disconnected.
•Test Failed means some other errors occurred during cable diagnostics. Please select the same port and
test again.
Cable Fault Distance (meters): Indicates the distance of the cable fault from the Switch port, if the cable is
less than 2 meters, it will show "No Cable". The deviation of "Cable Fault Distance" is +/-2 meters.
28