Rear Panel; Dgs-1100-16; Front Panel - D-Link EasySmart DGS-1100-08P Manual

D-Link EasySmart Switch User Manual
Blinking: Indicates that the Switch is either sending or receiving data to the port.
Green: Indicates that the port is running at 1000M.
Amber: Indicates that the port is running at 10/100M.
Light off: No link.
PoE LED (Ports 1-8):
Green: Indicates the PoE powered device (PD) is connected and the port supplies power successfully.
Red: The PoE port has failed, possibly due to:
1. PoE total power budget shortage
2. Over current: Exceeds the power current of powered device's classification.
3. Short circuit: Short circuit has been performed on a powered device
Light off: Indicates no Powered Device (PD) connected.
Reset: By pressing the Reset button for 5 seconds the Switch will change back to the default configuration
and all changes will be lost.

Rear Panel

Figure 6 – DGS-1100-08P Rear Panel
48V/1.57A Desktop adapter: The port is where to connect the 48V/1.57A Desktop adapter.

DGS-1100-16

16-Port 10/100/1000Mpbs EasySmart Switch

Front Panel

Figure 7 - DGS-1100-16 Front Panel
Power LED: The Power LED lights up when the Switch is connected to a power source.
Link/Act/Speed LED (Ports 1-16):
Flashing: Indicates a network link through the corresponding port.
Blinking: Indicates that the Switch is either sending or receiving data to the port.
Green: Indicates that the port is running at 1000M.
Amber: Indicates that the port is running at 10/100M.
Light off: No link.
Reset: By pressing the Reset button for 5 seconds the Switch will change back to the default configuration
and all changes will be lost.
4