Installation; Din Front/Rear-Mount; Din Front-Mount - Pioneer AVX-7000 Manual

,QVWDOODWLRQ
• Before finally installing this product, connect the wiring temporarily, making sure it is all connected
up properly, and this product and the system work properly.
• Use only the parts included with this product to ensure proper installation. The use of unauthorized
parts can cause malfunctions.
• Consult with your nearest dealer if installation requires the drilling of holes or other
• modifications of the vehicle.
• Install this product where it does not get in the driver's way and cannot injure the passenger if there
is a sudden stop, like an emergency stop.
• If installation angle exceeds 30° from horizontal, this product might not give its optimum
performance.

DIN Front/Rear-mount

This product can be properly installed either from "Front" (conventional DIN Front-mount) or
"Rear" (DIN Rear-mount installation, utilizing threaded screw holes at the sides of product
chassis). For details, refer to the following illustrated installation methods.

DIN Front-mount

Installation with the rubber bush
1
182
53
30
2
3
4
1. Dashboard
2. Holder
After inserting the holder into the dashboard,
then select the appropriate tabs according to
the thickness of the dashboard material and
bend them.
(Install as firmly as possible using the top and
the bottom tabs. To secure, bend the tabs 90
degrees.)
3. Rubber bush
4. Screw