Changing The Wide Mode; Just (Just); Full (Full); Cinema (Cinema) - Pioneer AVX-7000 Manual

Changing the Wide Mode

You can select a desired mode for enlarging a 4:3 picture to a 16:9 one.
Just (JUST) + Full (FULL) + Cinema (CINEMA) + Zoom (ZOOM) + Normal (NORMAL)

Just (JUST)

The picture is enlarged slightly at the center and the amount of enlargement increases
horizontally to the ends, enabling you to enjoy a 4:3 picture without sensing any disparity even
on a wide screen.

Full (FULL)

A 4:3 picture is enlarged in the horizontal direction only, enabling you to enjoy a 4:3 TV picture
(normal picture) without any omissions.

Cinema (CINEMA)

A picture is enlarged by the same proportion as FULL or ZOOM in the horizontal direction and
by an intermediate proportion between FULL and ZOOM in the vertical direction; ideal for a
cinema-sized picture (wide-screen picture) where captions lie outside.

Zoom (ZOOM)

A 4:3 picture is enlarged in the same proportion both vertically and horizontally; ideal for a
cinema-sized picture (wide-screen picture).

Normal (NORMAL)

A 4:3 picture is displayed as it is, giving you no sense of disparity since its proportions are the
same as that of the normal picture.
• Different settings can be memorized for each picture.
• Some displays (e.g. the AUDIO VISUAL MASTER UNIT source display) are always indicated as
FULL irrespective of the setting of this mode. In this case, pressing the WIDE button causes "FULL"
to blink for 4 seconds to indicate that you cannot switch the wide mode.