Din Rear-Mount - Pioneer AVX-7000 Manual

,QVWDOODWLRQ
Removing this product.

DIN Rear-mount

Installation using the screw holes on the side of this product.
7
9
5
6
* *
8
10
5. Frame
Pull out to remove the frame.
(When reattaching the frame, point the side with
a groove downwards and attach it.)
6. Insert the supplied extraction keys into the unit, as
shown in the figure, until they click into place.
Keeping the keys pressed against the sides of the
unit, pull the unit out.
5. Frame
Pull out to remove the frame. (When reattaching
the frame, point the side with a groove
downwards and attach it.)
7. Select a position where the screw holes of the
bracket and the screw holes of this product
become aligned (are fitted), and tighten the
screws at 2 places on each side. Use any of truss
screws (4 × 3 mm), truss screws (5 × 6 mm) or
flush surface screws (5 × 6 mm), depending on
the shape of the screw holes in the bracket.
* Use truss screws (4 × 3 mm) only.
8. Screw
9. Factory radio mounting bracket
10. Dashboard or Console