L2Tp - D-Link DIR-505L User Manual

Section 3 - Configuration
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a user name and
password. This option is typically used for DSL services.
My Internet
Select L2TP (User name/Password) from the drop-down menu.
Connection:
Address Mode:
Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic.
L2TP IP Address:
Enter the L2TP IP address supplied by your ISP (Static only).
L2TP Subnet
Mask:
Enter the Subnet Mask supplied by your ISP (Static only).
L2TP Gateway:
Enter the Gateway IP address provided by your ISP.
L2TP Server IP:
Enter the Server IP provided by your ISP (optional).
User name:
Enter your L2TP user name.
Password:
Enter your L2TP password and then retype the password in the
next box.
Reconnect
Mode:
Select either Always on, On demand, or Manual.
Maximum Idle
Enter a maximum idle time during which the Internet connection
Time:
is maintained during inactivity. To disable this feature, enable
Always on.
D-Link DIR-505L User Manual

L2TP

40