Lan Setup - D-Link DIR-505L User Manual

Section 3 - Configuration
Operation
Select Access Point from the drop-down menu.
Mode:
Device Name:
Allows you to configure the device more easily when your
network is using TCP/IP protocol. Enter a name for your
device.
My LAN
Select from the drop-down menu the Operation Mode you
Connection is:
would like to use.
IP Address:
Enter the IP address assigned by your ISP.
Subnet Mask:
Enter the Subnet Mask assigned by your ISP.
Gateway
Address:
Enter the Gateway assigned by your ISP.
Primary/
Enter the Primary and Secondary DNS server IP addresses
Secondary DNS
assigned by your ISP. These addresses are usually obtained
Server: automatically from your ISP. Enter the value 0.0.0.0 if you
did not specifically receive these from your ISP.
D-Link DIR-505L User Manual

LAN Setup

84