System - D-Link DIR-505L User Manual

Section 3 - Configuration
This section allows you to manage the Access Point's configuration settings, reboot the AP, and restore the AP to the factory
default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that you've created.
Save Settings
Use this option to save the current router configuration settings
To Local Hard
to a file on the hard disk of the computer you are using. First,
Drive: click the Save button. A file dialog will appear, allowing you to
select a location and file name for the settings.
Load Settings
Use this option to load previously saved router configuration
From Local settings. First, use the Browse option to find a previously saved
Hard Drive: file of configuration settings. Then, click the Upload Settings
button below to transfer those settings to the router.
Restore To This option will restore all configuration settings back to the
Factory Default settings that were in effect at the time the router was shipped
Settings: from the factory. Any settings that have not been saved will
be lost, including any rules that you have created. If you want
to save the current router configuration settings, use the Save
button above.
Reboot The
Device: Click to reboot the router.
Clear If you previously installed a language pack and want to revert all
Language the menus on the router interface back to the default language
Pack: settings, click the Clear button.
D-Link DIR-505L User Manual

System

91