Error Messages - Samsung WB200F User Manual

Error messages

When the following error messages appear, try these remedies.
Error message Suggested remedies
• Turn off your camera, and then turn it on again.
Card Error • Remove your memory card, and then insert it again.
• Format your memory card.
You can lock an SD, SDHC, or SDXC card to prevent files
from being deleted. Unlock the card when shooting.
Card Locked
The inserted memory card is not supported by your
Card not supported.
camera. Insert a SD, SDHC, or SDXC memory card.
• The camera cannot connect to the network using the
selected access point. Select another AP and try again.
Connection failed.
• The camera has failed to connect to the other devices.
Try connecting again.
Error message
DCF Full Error
Device disconnected.
File Error
File system not
supported.
Initialization failed.
Password Incorrect
Low Battery
136
Appendixes
Suggested remedies
File names do not match the DCF standard. Transfer the
files from the memory card to your computer and format
the card. Then, open the Settings menu and select File
No. → Reset. (p. 133)
Network connection disconnected while transferring
photos. Reselect a device that supports AllShare Play.
Delete the damaged file or contact a service center.
Your camera does not support the FAT file structure of
the inserted memory card. Format the memory card on
the camera.
The camera has failed to locate a device that supports
AllShare Play. Turn on devices on the network that
support AllShare Play.
The password for transferring files to another camera is
wrong. Enter the correct password.
Insert a charged battery or recharge the battery.