Error Messages - Samsung WB152 User Manual

Error messages

When the following error messages appear, try these remedies.
Error message Suggested remedies
•
Turn off your camera, and then turn it on
again.
•
Remove your memory card, and then insert
Card Error
it again.
•
Format your memory card.
You can lock an SD, SDHC, or SDXC card to
prevent files from being deleted. Unlock the card
when shooting.
Card Locked
The inserted memory card is not supported
Card not
by your camera. Insert a SD, SDHC, or SDXC
supported.
memory card.
•
The camera cannot connect to the network
using the selected access point. Select
another AP and try again.
Connection failed.
•
The camera has failed to connect to the other
camera. Try connecting again.
Error message
DCF Full Error
Device
disconnected.
File Error
File system not
supported.
Initialization failed.
Invalid password.
Low Battery
127
Appendixes
Suggested remedies
File names do not match the DCF standard.
Transfer the files from the memory card to your
computer and format the card. Then, open the
Settings menu and select File No.
(p. 124)
Network connection disconnected while
transferring photos. Select a TV Link device
again.
Delete the damaged file or contact a service
center.
Your camera does not support the FAT file
structure of the inserted memory card. Format
the memory card on the camera.
•
Turn on TV Link enabled devices on the
network.
•
The camera has failed to locate a TV Link-
enabled device.
The password for transferring files to another
camera is wrong. Enter the correct password
again.
Insert a charged battery or recharge the battery.
Reset.