Tire Pressure Sensor Sleep Mode; Using The Compass; Finding Your Last Parking Spot; Viewing Previous Routes And Destinations - Garmin zumo 390LM Owner's Manual

Low tire pressure
Low sensor battery
Sensor not connected

Tire Pressure Sensor Sleep Mode

If the tire pressure sensor does not detect motion for an
extended period of time, the sensor enters a power-saving
sleep mode. The sensor does not transmit information to the
zūmo device while in sleep mode. Extended stops, such as
traffic delays or railroad crossings, may cause the sensors on
your vehicle to enter sleep mode. This can cause your zūmo
device to report the sensor is disconnected.
The next time your vehicle moves, the sensor exits sleep mode
and automatically reconnects to the zūmo device. It may take
up to 30 seconds to reconnect.

Using the Compass

NOTE: You must be moving for the compass to determine your
direction.
You can navigate using a GPS compass.
Select Apps > Compass.

Finding Your Last Parking Spot

When you disconnect the device from vehicle power while the
device is on, your current location is saved as a parking spot.
Select Apps > Last Spot.

Viewing Previous Routes and Destinations

Before you can use this feature, you must enable the travel
history feature (page 16).
You can view your previous routes and places you have
stopped on the map.
Select Apps > Where I've Been.

Logging Service History

You can log the date and odometer reading when service or
maintenance is performed on your vehicle. The device provides
several service categories, and you can add custom categories
(page 12).
1
Select Apps > Service History.
2
Select a service category.
3
Select Add Record.
4
Enter the odometer reading, and select Next.
5 Enter a comment (optional).
6
Select Done.

Adding Service Categories

1
Select Apps > Service History.
2
Select > Add Category.
3 Enter a category name, and select Done.

Deleting Service Categories

When you delete a service category, all service records in the
category are also deleted.
1
Select Apps > Service History.
2
Select > Delete Categories.
3
Select the service categories to delete.
4
Select Delete.
Renaming Service Categories
1
Select Apps > Service History.
2 Select the category to be renamed.
12
3 Select Rename Category.
4
Enter a name, and select Done.

Deleting Service Records

1
Select Apps > Service History.
2
Select a service category.
3 Select > Delete Records.
4
Select the service records to be deleted.
5
Select Delete.

Editing a Service Record

You can edit the comment, odometer reading, and date of a
service record.
1
Select Apps > Service History.
2 Select a category.
3
Select a field.
4
Enter the new information, and select Done.

Using the World Clock

1
Select Apps > World Clock.
2 If necessary, select a city, enter a city name, and select
Done.

Viewing the World Map

Select Apps > World Clock >
Nighttime hours appear in the shaded area of the map.

Setting an Alarm

1
Select Apps > Alarm Clock.
2
Set a time.
3
Select the Alarm On check box.

Using the Calculator

Select Apps > Calculator.

Converting Units

1 Select Apps > Unit Converter.
2
If necessary, select the button next to Convert, select a
measurement category, and select Save.
3
If necessary, select a unit button, select a unit of
measurement, and select Save.
4
Select the field below the unit you want to convert.
5
Enter the number, and select Done.

Setting Currency Conversion Rates

This feature is not available in all areas.
You can update the currency conversion rates for the unit
converter.
1
Select Apps > Unit Converter.
2
Select the button next to Convert.
3
Select Currency, and select Save.
4
If necessary, select a currency button, select a different
currency, and select Save.
5
Select the button at the bottom of the screen that displays
the currency conversion rates.
6
Select the box next to a currency.
7
Enter a value, and select Done.
8
Select OK.

Using the Language Guide

Use the Language Guide to look up and translate words or
phrases.
.
Using the Apps