Receiving A Call; Using The Call History; Using In-Call Options; Saving A Home Phone Number - Garmin zumo 390LM Owner's Manual

2 Select a point of interest
3
Select Call.

Receiving a Call

When you receive a call, select Answer or Ignore.

Using the Call History

Your call history is loaded from your phone to the device each
time your phone and the device connect. It may take a few
minutes for the call history to be available. Some phones do not
support this feature.
1
Select Phone > Call History.
2
Select a category.
A list of calls appears, with the most recent calls at the top.
3
Select a call.

Using In-Call Options

1
From the map, while on a call, select
2
Select an option.
• To transfer audio to your phone, select Handset.
TIP: You can use this feature if you want to turn off your
device and remain on the call, or if you need privacy.
TIP: You can use this feature to use automated systems,
such as voice mail.
• To mute the microphone, select Mute.
• To hang up, select End Call.

Saving a Home Phone Number

TIP: After you save a home number, you can edit the home
number by editing "Home" in your list of saved locations
(page 6).
Select Phone > > Set Home Number, enter your phone
number, and select Done.
Calling Home
Before you can call home, you must enter a phone number for
your home location.
Select Saved > Home >

Disconnecting a Bluetooth Device

You can temporarily disconnect a Bluetooth device without
deleting it from the paired devices list. The Bluetooth device can
still connect to your zūmo device automatically in the future.
1
Select Settings > Bluetooth.
2 Select the device you want to disconnect.
3
Clear the device check box.

Deleting a Paired Bluetooth Device

You can delete a paired Bluetooth device to prevent it from
automatically connecting to your zūmo device in the future.
1
Select Settings > Bluetooth.
2
Select the device to delete.
3 Select Delete Device.

Using the Apps

Using Help

Select Apps > Help to view information about using the
device.

Searching Help Topics

Select Apps > Help >
10
(page 4).
.
> Call.
.

Planning a Trip

You can use the trip planner to create and save a trip with
multiple destinations.
1
Select Apps > Trip Planner.
2 Select New Trip.
3
Select Select Start Location.
4
Search for a location (page
5
Select Select.
6
To add additional locations, select
7 Select Next.
8
Enter a name, and select Done.

Scheduling a Trip

You can use the trip planner to create and save a trip with
multiple destinations.
1
Select Apps > Trip Planner.
2
Select a trip.
3 Select a location.
4
Select an option:
• Select Departure Time.
• Select Arrival Time.
5
Select a date and time, and select Save.
6
Select Duration.
7
Select the amount of time you will spend at the location, and
select Save.
8 If necessary, repeat steps 3–7 for each location.

Changing Transportation Modes in a Trip

You can change the transportation modes used to travel in a
saved trip.
1
Select Apps > Trip Planner.
2
Select a trip.
3
Select > Transportation Mode.
4 Select a transportation mode.
5
Select Save.

Navigating to a Saved Trip

1
Select Apps > Trip Planner.
2
Select a saved trip.
3 Select Go!.
4
If prompted, select a route

Editing a Saved Trip

1
Select Apps > Trip Planner.
2
Select a saved trip.
3 Select .
4
Select an option:
• Select Rename Trip.
• Select Edit Destinations to add and delete a location, or
to change the order of locations.
• Select Delete Trip.
• Select Optimize Order to arrange the stops on your trip
in the most-efficient order.
TracBack ®

Following Your Recent Track

The TracBack feature records a track of your recent movement.
You can retrace your recent track back to where you started.
1
Select TracBack.
Your recent track appears on the map.
4).
.
(page 6).
Using the Apps