Using Lcd Monitor; Indicator Lamp Display; Af-Assist Illuminator; Number Of Available Frames - FujiFilm FinePix S5200 Owner's Manual

TAKING PICTURES ( AUTO MODE )
PHOTOGRAPHY MODE

USING LCD MONITOR

1
2
3
12 12 12
N N N
AF frame

INDICATOR LAMP DISPLAY

Display
Lit green AF/AE lock in progress, Setting video output
Blinking green Camera shake warning or AF warning (ready to shoot)
Blinking green and Recording to xD-Picture Card (ready to shoot)
orange alternately
Lit orange Recording to xD-Picture Card (not ready)
Blinking orange Charging the flash (flash will not fire)
Blinking red
i xD-Picture Card Warnings
No card inserted, card not formatted, incorrect format, card full and xD-Picture Card error
i Lens operation error
24
When using the LCD monitor to take pictures,
press the "EVF/LCD" button to select the LCD
monitor.
Brace your elbows against your sides and hold the
camera with both hands. Position your right thumb
so that it is handy for using the zoom.
●
!
Moving the camera while shooting gives a blurred picture
(camera shake). Use a tripod to prevent camera shake,
particularly for shots in the dark when the selected flash
mode is Suppressed flash.
●
!
There may be some uneven brightness at the lower edge of
the screen. This is normal and does not affect the
photographed image.
Frame the shot so that the subject fills the entire AF
(Autofocus) frame.
●
!
The image shown on the LCD monitor before the picture is
taken may differ in brightness, color, etc. from the image
actually recorded. Play back the recorded image to check it
(➡P.28).
●
!
When the subject is not in the AF frame, use AF/AE lock to
take the picture (➡P.26).
Status
✽ Detailed warning messages appear on the screen (➡P.123-124).

AF-ASSIST ILLUMINATOR

NUMBER OF AVAILABLE FRAMES

N N N 12 12 12

■ Standard number of frames per xD-Picture Card

The table below shows the standard number of frames for a new xD-Picture Card formatted on the camera. The larger the
xD-Picture Card capacity, the bigger the difference between the actual number of frames and the number shown here. Also,
the size of an image file varies depending on the subject. So the number of remaining shots may decrease by 2 or may
remain the same. For this reason, the number displayed may not show the actual number of frames.
÷ ÷
Quality setting F N
2592 × 1944 2736 × 1824
Number of recorded pixels
DPC-16 (16 MB) 6 12
DPC-32 (32 MB) 12 25
DPC-64 (64 MB) 25 50
DPC-128 (128 MB) 51 102
DPC-256 (256 MB) 102 204
DPC-512/M512 (512 MB) 205 409
DPC-M1GB (1 GB) 412 819
Press the shutter button down halfway in dimly lit
conditions. The camera fires the AF-assist
illuminator (green) to allow easier focusing.
Note that the effective range decreases for
telephoto shots.
●
!
Even when the AF-assist illuminator fires, the camera may
have difficulty focusing in some conditions.
●
!
Even though there is no danger to safety, do not expose it
directly in someone's eyes from a short distance.
●
!
The camera focuses most easily when a picture is taken at a
distance of around 3.2 m (10.5 ft.) with wide-angle and 2.4 m
(7.9 ft.) with telephoto.
●
!
When using the AF-assist illuminator in Macro mode, the
camera may have difficulty focusing to take close-up shots.
●
!
See P.92 for information on turning the AF-assist illuminator
off.
The number of available frames appears on the
screen.
●
!
See P.54 for information on changing the quality setting.
●
!
˘ ÷
The default quality " " set at shipment is " N".
„ 3 2 ` ~
2048 × 1536 1600 × 1200 640 × 480
—
12 19 25 122
25 40 50 247
51 81 101 497
103 162 204 997 11
207 325 409 1997 23
414 651 818 3993 46
830 1305 1639 7995 92
2
1
2
5
25