Tools Menu; Asus Ez Flash 2 Utility; Rog Secure Erase - Asus MAXIMUS VI FORMULA User Manual

3.9

Tools menu

The Tools menu items allow you to configure options for special functions. Select an item
then press <Enter> to display the submenu.
3.9.1

ASUS EZ Flash 2 Utility

Allows you to run ASUS EZ Flash 2. When you press <Enter>, a confirmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
confirm your choice.
For more details, refer to section 3.11.2 ASUS EZ Flash 2 utility.
3.9.2

ROG Secure Erase

SSD speeds may lower over time as with any storage medium due to data processing.
Secure Erase completely and safely cleans your SSD, restoring it to factory performance
levels.
Secure Erase is only available in AHCI mode. Ensure to set the SATA mode to AHCI. Click
Advanced > SATA Configuration > AHCI.
To launch ROG SSD Secure Erase, click Tool > ROG SSD Secure Erase on the Advanced
mode menu.
Check the ASUS support site for a full list of SSDs tested with Secure Erase. The drive may
become unstable if you run Secure Erase on an incompatible SSD.
•
•
3-50
The time to erase the contents of your SSD may take a while depending on its size.
Do not turn off the system during the process.
Secure Erase is only supported on Intel SATA port. For more information about Intel
SATA ports, refer to section 1.2.2 of this manual.
Chapter 3: BIOS setup