Table of Contents
Advertisement
Say a Command Options
•
Call <Name or #>
dials a name or number listed in your contact
:
list. If multiple numbers exist (i.e. home, work, or other) say the
name and the number type (location).
•
Send Text <Name or #>
screen.
•
Lookup <Name>
allows you to use a voice command to locate
:
and display contact information stored in Contacts. For more
information, refer to "Finding a Contact Entry" on page 65.
•
Go to <Menu>
accesses all the features of your phone if they are
:
activated, such as: T-zones, Calendar, Ringtones, Tasks,
Contacts, Voice mail, and Games.
•
Check <Item>
lets you check your phone's status in the same
:
report (Status, Messages, Missed Calls, Time, Signal Strength,
Network, Battery, My Phone Number, and Volume).
displays the Create Text Message
:
While the Say a command screen displays you have two
options:
•
Tutorial: provides examples of how to use the voice commands.
•
Settings: lists the settings for voice command software such as:
Confirmation, Adaptation, Audio Modes, Speakerphone,
and About.
If the phone does not recognize your command the
Command not recognized screen displays with two options:
•
Restart: touch and try the command options again.
Speak clearly when giving your command. There is no need
for you to speak slowly or with added emphasis. The voice
software has been optimized to understand your speech in
its natural form. If it does not recognize your command after
a few seconds, a voice prompt asks you to repeat the
command. If it does not recognize your command again, the
following message displays "Sorry, no match found," and
voice turns off.
Important! You must end your current Voice Commands call
before you can make another call.
Call Functions
49
Advertisement
Table of Contents
