Confirm Driver Installation After Reboot; Ensuring X8 Accelerator Is Operational - Seagate ST1100FR0000 User Manual

For additional vSphere Update Manager details please refer to the following VMware KB article
2004501
5.1.4

Confirm Driver Installation After Reboot

~ ~ # esxcli software vib list | grep -i seagate
block-vgc
esxcli-vgc-utils
5.2 E X8 A
NSURING CCELERATOR IS
Check if Driver Modules are loaded using the vmkload_mod command:
~ # vmkload_mod -l | grep vgc
vgc
To verify the other operational parameters, such as X8 Accelerator device health, use the esxcli vgc monitor command
documented in this Guide. In addition, please review the section on configuring datastore on ESXi systems as well.
S X8 A
EAGATE CCELERATOR FOR
3.2.55402.C7-1OEM.500.0.0.472560
3.2.55402.C7-5.0.0.464360
O
PERATIONAL
1 1788
VM ESX U
WARE I SER
Seagate VMwareCertified 2013-04-09
Seagate PartnerSupported 2013-04-09
G , R . A
UIDE EV
http://kb.vmware.com/kb/
10