Floppy Drive - Dell XPS /Dimension Gen 5 Owner's Manual

7 Connect a power cable to the drive.
8 Connect the hard-drive cable to the drive and to the system board (see page 77).
9 Close the computer cover (see page 121).
NOTICE:
To connect a network cable, first plug the cable into the network device and then plug it into
the computer.
10 Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software
required for drive operation.

Floppy Drive

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.
rail tabs (2)
second hard drive in
upper bay
first hard drive in
lower bay
hard drive bay
Removing and Installing Parts
99