Dell XPS /Dimension Gen 5 Owner's Manual page 102

power cable
4 Attach the power and data cables to the floppy drive.
5 Connect the other end of the data cable to the DSKT connector on the system board (see
page 77).
6 Check all cable connections, and fold cables out of the way to provide airflow for the fan and
cooling vents.
7 Close the computer cover (see page 121).
NOTICE:
the computer.
8 Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software
required for drive operation.
9 Enter system setup (see page 127) and update the appropriate Diskette Drive option.
10 Verify that your computer works correctly by running the Dell Diagnostics (see page 58).
102
Removing and Installing Parts
tabs (2)
floppy drive
To connect a network cable, first plug the cable into the network wall jack and then plug it into