Dell OptiPlex 9020 AIO Owner's Manual page 45

Option
Advanced Boot Options
Date/Time
Table 3. System Configuration
Option
Integrated NIC
SATA Operation
Drives
SMART Reporting
Description
• View - Enables you to view the current boot option in the computer.
• Load Defaults - Restores the default settings of the computer.
• Apply - Enables you to apply the settings.
• Exit - Exits and starts the computer.
The Enable Legacy Option ROMs option will allow the legacy option ROMs to load,
when in UEFI boot mode. Without this option, only UEFI option ROMs will load. This
option is required for Legacy boot mode. This Legacy boot mode is not allowed when
you enable the Secure Boot. By default, the Enable Legacy Option ROMs check-box is
not selected. The other options are:
• Load Defaults - Restores the default settings of the computer.
• Apply - Enables you to apply the settings.
• Exit - Exits and starts the computer.
Allows you to set the date and time. The changes to the system date and time takes
effect immediately.
Description
Allows you to enable or disable the integrated network card. You can set the
integrated NIC to:
• Disabled
• Enabled
• Enabled w/PXE
• Enabled w/Cloud Desktop
NOTE: Depending on the computer and its installed devices, the items listed in
this section may or may not appear.
Allows you to configure the operating mode of the integrated SATA hard drive
controller.
• Disabled - The SATA controllers are hidden.
• ATA - SATA is configured for ATA mode.
• AHCI - SATA is configured for AHCI mode.
• RAID ON - SATA is configured to support RAID mode.
Allows you to enable or disable the various on-board drives:
• SATA-0
• SATA-1
• SATA-4
This field controls if the hard drive errors for the integrated drives are reported during
system startup. This technology is part of the SMART (Self Monitoring Analysis and
Reporting Technology) specification.
• Enable SMART Reporting - This option is disabled by default.
45