Installing The Vesa Mount Bracket; Removing The Power And On-Screen Display (Osd) Buttons Board - Dell OptiPlex 9020 AIO Owner's Manual

Installing the VESA Mount Bracket

1. Align and place the bracket on the back of the computer.
2. Tighten the screws that secure the VESA mount bracket to the computer.
3. Install the:
a) back cover
b) VESA stand
4. Follow the procedures in

Removing the Power and On-Screen Display (OSD) Buttons Board

1. Follow the procedures in
2. Remove the:
a) VESA stand
b) back cover
3. Disconnect the cable from the and power and on-screen display (OSD) buttons board. Lift the power and on-screen
display (OSD) buttons board from the chassis.
14
After Working Inside Your Computer .
Before Working Inside Your Computer .