Removing The Intrusion Switch - Dell OptiPlex 9020 AIO Owner's Manual

Owner's manual
Hide thumbs Also See for OptiPlex 9020 AIO:
Table of Contents

Advertisement

c) VESA stand
7.
Follow the procedures in

Removing the Intrusion Switch

1.
Follow the procedures in
2.
Remove the:
a) VESA stand
b) back cover
c) VESA mount bracket
d) system-board shield
3.
Disconnect the intrusion-switch cable from the connector on the system board. Unthread the cable from the
notches on the computer.
4.
Remove the screws that secure the intrusion switch to the chassis. Lift the intrusion switch and remove it from the
computer.
After Working Inside Your Computer .
Before Working Inside Your Computer .
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents