Download Print this page
Bushnell First Strike 730005 User Manual

Bushnell First Strike 730005 User Manual

Reflex red dot sight
Hide thumbs Also See for First Strike 730005:

Advertisement

Quick Links

Reflex Red Dot Sight
Model # 730005 / AR730005 / AR730005C
Lit #: 98-2313/03-13

Advertisement

loading

Summary of Contents for Bushnell First Strike 730005

  • Page 1 Reflex Red Dot Sight Model # 730005 / AR730005 / AR730005C Lit #: 98-2313/03-13...
  • Page 3 Its aiming system is engineered to be the brightest of its kind. All in all, this sight is proof positive that Bushnell is positioned squarely on the leading edge of advanced technology. The model# AR730005/AR730005C versions of the...
  • Page 4: Parts Guide

    Parts Guide A-Photocell B-Integrated Mount C-Lg. Hex Bolt D-Lens E-Elevation Adj Screw F-Windage Adj Screw G-Sm. Hex Bolts H-Protective Cover I-Alignment Pins...
  • Page 5 Parts Guide Included Accessories: • CR 2032 3v Lithium Battery (J) • Large Hex Wrench/Screwdriver (K) • Small Hex Wrench (L) • Protective Cover (previous page) (H)
  • Page 6 MOUNTING YOUR FIRST STRIKE REFLEX SIGHT • Any Weaver or Picatinny style base is suitable for mounting the First Strike (model# 730005). Make sure the base you use is manufactured specifically for your pistol, rifle or shotgun. Be sure the base is properly installed and securely fastened according to the manufacturer’s instructions for your safety.
  • Page 7 be mounted on the weapon by following these steps: 1. Loosen the mounting screw so that the clamp will fit over the tapered side of the firearm’s Picatinny or Weaver rail. 2. Insure that the tapered clamp on the riser is oriented with the chamfered (beveled) end of the clamp at the top (Fig.
  • Page 8 Point of Impact Change Chart Distance 1 Full Revolution of Adjustment Screw 25 yds 12.5 inches 50 yds 25 inches 100 yds 50 inches Distance 1 Hash Mark of Adjustment Screw 25 yds 1.5 inches 50 yds 3 inches 100 yds 6 inches ZEROING YOUR FIRST STRIKE REFLEX SIGHT Note: the following should be done at an approved...
  • Page 9: Replacing The Battery

    Adjusting the Windage (F) REPLACING THE BATTERY our new Bushnell First Strike electronic sight is powered by one 3V “coin-style” lithium battery, Type 2032 (J) (pre-installed). Should your reticle grow dim or not light at all, you will need to replace the battery.
  • Page 10: Technical Specifications

    LITHIUM BATTERY REFERENCE CHART Sunrise/ NEDA Duracell Radio Type Shack (size) DL2032 CR2032 5004L Other brands of batteries not listed in the chart are available and suitable for use with your First Strike sight. Refer to “coin cell” NEDA type when purchasing batteries or consult with your dealer.
  • Page 11: One-Year Limited Warranty

    ONE YEAR LIMITED WARRANTY Your Bushnell® First Strike elecronic reflex sight is warranted to be free of defects in materials and workmanship for one year after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid.
  • Page 12 For further questions or additional information please contact: Bushnell Outdoor Products 9200 Cody, Overland Park, Kansas 66214 (800) 423-3537 • www.bushnell.com ©2013 Bushnell Outdoor Products...

This manual is also suitable for:

First strike ar730005First strike ar730005c