Table of Contents
Advertisement
6. SETTING AND ADJUSTMENTS BEFORE SHOOTING
6-6 Switch Settings of the VCR Section
Audio input signal selection
Use the AUDIO INPUT switch to select whether the sound
recorded on audio channel 1 or 2 is the sound from the
microphone connector on the front section or the sound from
the AUDIO INPUT connector on the rear section.
See page 47.
Audio recording level adjustment selection
Select "AUTO" or "MANUAL" for the recording level
adjustment mode for each audio channel.
See page 48.
VCR Setup Menu setting
● REMOTE SELECT
Confirm that "LOCAL" is selected if you want to operate on
the GY-DV700W only.
● BACK TALLY MODE
Select the lightning pattern of the BACK TALLY lamp.
● INPUT SELECT
Select the input video signal. To record the GY-DV700W's
camera image, set to "CAMERA".
● LOW CUT IN
For each audio input connector, select whether or not the
lower frequency components of the audio signal are cut.
Set to this position to eliminate the wind noise of the
microphone.
● SAMPLING RATE
Select the sampling rate for audio recording (48 kHz or 32
kHz).
● FRONT VOLUME ENABLE
Set whether or not the front section's audio volume control
should be used. The front section's audio volume control only
affects the CH1 audio channel.
6-7 Screen Size Mode Selection (16:9 Picture or 4:3 Picture)
Select whether the screen size mode should be WIDE (16:9
picture) or NORMAL (4:3 picture).
Use either of the following methods to make the selection.
Make the selection using the ASPECT RATIO item on
the camera OPERATION MENU screen.
See page 73.
Or,
Use the aspect ratio switching lever on the lens section.
See page 23.
* If the settings made using the above methods are not
identical, the setting of the lens' switching lever will have
priority.
46
OPERATE/WARNING
RESET
MONITOR
FILTER
SELECT
1 3200k
ALARM
2 5600k+1/8ND
3 5600k
4 5600k+1/64ND
SHUTTER
STATUS
MONITOR
C
MENU
CH-1
AUDIO
CH-2
LEVEL
AUTO IRIS
FULL AUTO BLACK
LOLUX
BACK L
STRETCH
NORMAL
NORMAL
SPOT L
COMPRESS
NG
POWER
ON
OFF
PRESET/REGEN switch
CH-1
LIGHT
ON
OFF
COUNTER
CTL
TC
UB
LITHIUM BATT.
● LONG PAUSE TIME
Select the time (in minutes) until the GY-DV700W enters the
tape protection mode (drum rotation stops) when the record-
pause mode is continued for long time.
● SSF MODE
Select the mode of the S.S.F. (Super Scene Finder) function.
S.S.F. function: Stores the time code of desired scenes or
cue points in the unit's memory.
See "S.S.F. function" on page 60.
● DISPLAY SELECT
Select the counter display (time code or date/time indication)
when the COUNTER switch is set to "TC" or "UB".
Setting the time code recording function
The GY-DV700W records SMPTE-standard time code during
recording. Set the switches according to applications.
● To record a time code as set in the built-in time code
generator:
• Set the PRESET/REGEN switch to PRESET.
• Set the REC/FREE switch.
If it is required to record continual time codes across different
scenes, set the switch to REC.
• VCR Setup Menu setting
Select the time code generator's framing mode as drop
frame or non-drop using the VCR Setup Menu item No.
416 "NON DROP/DROP".
● To record a time code in continuation of the existing time
code on the tape:
• Set the PRESET/REGEN switch to REGEN.
• Set the VCR Setup Menu item No. 302 BACK SPACE to
"STANDARD".
For details on the time code operations including time code
presetting, see "TIME CODE OPERATION" on page 56.
* When the screen size mode is set to WIDE (16:9 picture),
the "WIDE" indicator is displayed in the counter display in
the stop, recording, record-pause, fast-forwarding and re-
winding modes.
CH 1
40 30
CH 2
32k
48k
SP
AUD LOCK
WIDE
MENU
WIDE indicator
* During recording in the WIDE mode, an ID signal for
identifying the WIDE screen mode is recorded together
with the video signal.
REC/FREE
switch
AUDIO
CH-2
TC GENERATOR
CH-1
CH-2
LEVEL
PRESET
FREE
AUTO
REGEN
REC
MANUAL
AUDIO SELECT
AUDIO INPUT
CH-1
CH-2
CONTINUE
MENU
FRONT
REAR
GROUP
ITEM
SELECT
DATA SET
HOLD
SHIFT
ADVANCE
PRESET
OVER
AUTO OFF DEW
20
10
0 dB
SERVO
RF
L i
OVER
SLAVE
PB
NDF
HOLD
H
M
S
F
Advertisement
Table of Contents
