Table of Contents
Advertisement
Thank you for purchasing the DV Camcorder GY-DV700W.
These instructions are for GY-DV700WU.
This unit is a MiniDV video system format camcorder.
Videocassettes which are not marked with the MiniDV
symbol cannot be used with this unit.
The following phenomena may occur when tapes recorded
on other units (including another GY-DV700W) are
recorded or played back on this camcorder.
● The transient section between scenes recorded on other
units and those recorded on this unit may appear
disturbed.
MAIN FEATURES
● 16:9 and 4:3 aspect ratio
Supports both NORMAL screen and WIDE screen format.
Simply switch the setting to cycle between 4:3 and 16:9
aspect ratio.
● Compact, lightweight design
Employment of magnesium die cast has resulted in an
operation-condition weight as low as approximately 5 kg
including lens, viewfinder, battery, and cassette.
● DV high-quality digital format
The 4:1:1, 8-bit, 25 Mbps component digital processing of
the format ensures recording and playback with high picture
quality.
● High sound quality thanks to PCM audio
Two types of sampling, 16-bit, 48 kHz sampling and 12-bit,
32 kHz sampling, ensure high-quality digital audio.
● Concentrated LCD display (back-lit)
The concentrated LCD panel shows the time code and CTL
counter, tape remaining time, remaining battery power, audio
levels, VCR section setup menus, hour meter data, and a
variety of warning indications. The display is back-lit to
facilitate viewing in dark locations.
● Time code reader/generator
The built-in time code reader/generator can be used to record
SMPTE time code and user's bits.
● Time code input/output connectors for slave lock capability
This unit can be slave-locked to an external time code
generator which is connected to the time code input.
The data in the built-in time code generator is output from
the time code output terminal.
● AEF (Automatic Edit Function) enables neat switching
between recorded scenes.
● Built-in monitor loudspeaker for audio checking
The input audio can be monitored in recording or EE mode.
The playback sound can be monitored in the playback mode.
The loudspeaker also outputs an alarm tone in case an
abnormal condition occurs in the unit.
● Rec check function for convenient recording review
● Camera section designed with 3-CCD system for high-quality
picture
Three 2/3-inch CCDs with 484,000 effective pixels employed.
Digital signal processing for reproduction of high-quality pic-
ture.
4
● Digital noise may appear during playback due to tracking
errors.
● This unit records and plays back in the SP mode.
Recording or playback in the LP mode is not possible.
● Due to manufacturing dispersion of tapes, we
recommend not to record pictures within the first 2 to 3
minutes from the beginning of the tape.
● Before recording important scenes, be sure to perform a
test recording and confirm that both video and audio are
recorded correctly.
● Recorded video and audio contents are for private use.
Other use may infringe on the rights of copyright holders.
● JVC cannot assume liabilities that may derive from the
impossibility of normal recording or playback of video or
audio due to malfunction of the camcorder or the
videocassette.
● Super sensitivity F/11, 2000 lux
Enables shooting at normal indoor illumination eliminating
the need for extra illumination.
● LOLUX for 0.75 lux (F1.4) illumination
Employment of LOLUX mode ensures +33 dB gain. This is
ideal for difficult shooting conditions with almost no
illumination.
● Multi-Zone Auto Iris Detection Circuit
Multi-zone auto iris detection circuit ensures optimum iris position
even in backlit conditions or when a bright subject moves in a
frame. Switch provided for selecting over or under level.
● Safety Zone indication in viewfinder
Three types of safety zone indicator functions provided.
Center mark can be turned ON/OFF.
● Zebra pattern video level indication in viewfinder
Select video level indicated by zebra pattern by means of
menu setting.
● Full Auto Shooting (FAS) function
Eliminating the need for troublesome switch or filter
operations, the FAS function automatically provides a wide
range of compatibility with shooting conditions which varies
as you move between indoors and outdoors or between bright
and dark locations.
● Color temperature conversion filters for "3200K", "5600 K +
1/8 ND", "5600K", "5600 K + 1/64 ND" provided.
● Variable scan shutter
Eliminates flicker when shooting other screen pictures than
NTSC, such as computer monitor screens.
Copes with the range from 60.1 Hz to 2067.0 Hz.
● DV (i. LINK) connector
DV connector (4-pin) provided. Enables transfer of digital
data to other equipment provided with DV connector, such
as a non-linear editing controller.
● S.S.F. (Super Scene Finder) function
Enables memorization of the start point and ending point of
each scene or memorization of CUE points.
● Camera output, VCR playback output (composite/YC)
possible
● External sync input connector
● Built-in color bar (SMPTE type)
● Superior operability with shutter speed and menus selected
by dial.
Advertisement
Table of Contents
