Set-Up Menu Options; Power Save Setting; Format - FujiFilm FinePix FinePix A605 Owner's Manual

SET-UP

■ SET-UP menu options

Settings Display Factory default
IMAGE DISP. ON/OFF ON
POWER SAVE 2 MIN/5 MIN 2 MIN
1

FORMAT

OK –
§ BEEP LOW/HIGH/OFF LOW
DATE/TIME SET –
TIME
SET –
DIFFERENCE
2
qLCD ON/OFF ON
FRAME NO. CONT./RENEW CONT.
¶/qWEB/
USB MODE ¶
¢
ENGLISH
3
VIDEO SYSTEM NTSC/PAL PAL
DISCHARGE OK –
4 qRESET OK –
46
Explanation
Specifies whether an image checking screen (photography result)
appears after taking a picture.
The image appears for a few moments and then recorded.
Reduces the camera's power consumption and to subsequently
turn the camera off when not being used. See P.47 for details.
Erases all files. See P.47 for details.
Sets the volume of the tone emitted when the camera controls
are used.
Corrects the date or time. See P.14 for details.
Specifies the time difference settings. See P.48 for details.
Specifies whether the LCD monitor is ON or OFF when the
camera is turned on in Photography mode.
Specifies whether frame numbers are assigned consecutively
from previous numbers or begin again. See P.49 for details.
Selects the function when the camera is connected to a computer
or a printer. See P.58 for details.
Specifies the language used for LCD monitor display.
Specifies whether video output is set to NTSC or PAL.
Discharges rechargeable batteries. See P.72 for details.
Resets all the camera settings (other than the DATE/TIME, TIME
DIFFERENCE, LANG. and VIDEO SYSTEM) to the factory
default values set at shipment. A confirmation message appears
when you press "c". To reset the camera settings, press the
"MENU/OK" button again.

POWER SAVE SETTING

ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
1 2 3 4
ＩＭＡＧＥ ＤＩＳＰ． : ＩＭＡＧＥ ＤＩＳＰ． ＯＮ ＯＮ
ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ ２ ＭＩＮ ２ ＭＩＮ
ＦＯＲＭＡＴ ＦＯＲＭＡＴ : ＯＫ
ＯＫ
ＢＥＥＰ ＢＥＥＰ : ＬＯＷ ＬＯＷ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
The Sleep function does not operate in SET-UP or Playback mode, but the camera will turn off if it
is left unused for a set some time (2 or 5 minutes).
◆ ◆
To restore power to the camera
ON OFF
FORMAT
ＦＯＲＭＡＴ ＦＯＲＭＡＴ
ＦＯＲＭＡＴ ＦＯＲＭＡＴ ＯＫ？ ＯＫ？
ＥＲＡＳＥ ＥＲＡＳＥ ＡＬＬ ＡＬＬ ＤＡＴＡ ＤＡＴＡ
ＯＫ ＯＫ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
ＳＥＴ ＳＥＴ
When this function is enabled, the screen
temporarily turns off (Sleep mode) and the
viewfinder lamp (green) blinks at 1-second intervals
to save power if the camera is not used for 30
seconds. If the camera remains unused for an
additional interval (2 or 5 minutes), it is turned off.
Use this function when you want to get the maximum
possible running time from your batteries.
●
!
The Power save setting is disabled during automatic
playback, during rechargeable batteries discharging and
when a USB connection is being used.
When the camera is in Sleep mode, pressing "a",
"b", "d" or "c" wakes the camera up. This is
useful since the camera can be ready to take
pictures instantly. Pressing also the Shutter button
wakes the camera up.
●
!
Pressing any other button as well as "a", "b", "d" and "c"
wakes the camera up.
To take pictures, briefly close and then re-open the
lens cover. To play back images, close the lens cover
then hold down "Playback" button for approx. 1
second.
Formatting erases all the frames (files).
Initialize the xD-Picture Card for use in the
camera.
Back up important frames (files) onto your
computer or another media.
1 Press "d" or "c" to select "OK".
2 Pressing the "MENU/OK" button erases all the
frames (files) and initializes the xD-Picture
Card.
Formatting erases protected files also.
●
!
å ˚ ƒ
If " ", " ", "
©
" " appears, see P.74 for information
before formatting the xD-Picture Card.
4
" or
47