Number Of Available Frames; Using Af/Ae Lock - FujiFilm FinePix F410 Owner's Manual

SHOOTING STILL IMAGES (
MODE

Number of Available Frames

The number of available shots is displayed on
the LCD monitor.
G
!
See P.43 for information on changing the image
quality.
G
!
The default image quality " " set at shipment is
I Standard number of shots per xD - Picture Card
This is the standard number of shots displayed for a new xD - Picture Card that was formatted on the
camera. Because the amount of data recorded varies depending on the subject, the number of
available shots may not decrease when recording ends, or may decrease by 2 frames. The
discrepancy between the standard number of available shots and the actual number of available shots
increases in proportion to the capacity of the xD - Picture Card.
Quality
6M
2816 × 2120
Number of recorded pixels
DPC - 16 ( 16MB ) 10
DPC - 32 ( 32MB ) 21
DPC - 64 ( 64MB ) 43
DPC - 128 ( 128MB ) 86
DPC - 256 ( 256MB ) 173
28
AUTO MODE )
.
3M 1M
2048 × 1536 1280 × 960 640 × 480
19 33
40 68
81 137
162 275
325 550 1997
USING AF / AE LOCK
MODE
1
In a shot with this type of composition, the
subjects (two people in this case) are not in the
AF frame. If the shot is taken at this point, the
subjects will not be in focus.
0.3M
N
AF ( Autofocus ) /AE ( Auto exposure ) Lock
On the FinePix F410, when you press the shutter button down half way, the focus and exposure settings
122
are fixed ( AF/AE lock ) . If you want to focus on a subject that is off to one side of the image or if you want
247
to set the exposure before you compose the final shot, lock the AF and AE settings and then compose
497 and shoot your picture to get the best results.
997
2
３３ ３３
１／５００ Ｆ２．８ １／５００ Ｆ２．８
Move the camera slightly so that one of the
subjects in the AF frame.
N
Continued on next page...
2
29