Continuous Shooting - FujiFilm FinePix F410 Owner's Manual

SELF - TIMER PHOTOGRAPHY
PHOTOGRAPHY MENU
3
The self timer lamp lights for 5 seconds and then
starts flashing. 5 seconds later the camera
makes a clicking noise and takes the picture.
G
!
To stop the self-timer once it has started running,
58
press the "BACK" button.
4
７
１／５００ Ｆ２．８ １／５００ Ｆ２．８
A counter on the LCD monitor counts down the
time until the shot is taken.
Self-timer mode is automatically cancelled after
each shot.

CONTINUOUS SHOOTING

PHOTOGRAPHY MENU
1
This mode can be selected in the " ", "
image modes.
Select the continuous shooting mode you want
to use.
See P.60 for more information on continuous
shooting modes.
G
!
" " appears on the LCD monitor during
shooting.
G
!
You cannot use the flash in this mode.
G
!
The speed of continuous shooting remains the same
regardless of the image quality setting.
G
!
The shots should be taken using the viewfinder.
G
!
The results of the shot are displayed even when
"IMAGE DISP." is set to OFF ( ➡P.83 ) .
G
!
The time required to record a file is approximately
12 seconds in " " mode ( for TOP or FINAL 4 - frame
continuous shooting ) .
✽ Displaying the menus (➡P.42)
✽ Displaying the menus ( ➡P.55 )
2
" still
When Top 4 - frame continuous shooting is set to
ON, the " " appears on the LCD monitor. When
Final 4 - frame continuous shooting is set to ON,
" " appears on the LCD monitor.
Continuous shooting continues while the shutter
button is pressed down fully.
G
!
The focus and exposure are determined for the first
frame and cannot be changed during shooting.
G
!
If there is insufficient available space on the xD -
Picture Card to take the maximum number of
continuous shots, the number of shots that can be
recorded is taken.
3
59