Finepix Color - FujiFilm FinePix F410 Owner's Manual

SENSITIVITY
PHOTO MODE STILL IMAGE / MOVIE
High-sensitivity photography ( 800 )
3
When a high-sensitivity ( 800 ) is selected, the
quality is automatically set to " ".
When you use a high sensitivity setting, "
appears on the LCD monitor.
G
!
The digital zoom cannot be used in high-sensitivity
46
photography.
I Camera settings for high-sensitivity
photography
The sensitivity remains set to high ( 800 ) even if
the Mode switch is set to Playback or the
camera is switched off.
N
Quality setting in high-sensitivity mode
➡P.43
(
If you try to select a quality setting
than " " when the camera is set to high-
sensitivity mode, " " is displayed blinking
and the quality cannot be changed.
"
G
!
When you specify a high sensitivity, the amount of
noise ( interference ) in the image shown on the LCD
monitor before the shot is taken increases. However,
this is normal and does not indicate a fault.
PHOTO MODE STILL IMAGE / MOVIE
1
0 1
ON
N
)
other
1 Slide the Power switch to the side to turn the
camera on.
2 Set the Mode switch to "
3 Press the Photo mode ( ) button.
G
!
In " " Movie mode, you cannot set the "FinePix
COLOR" setting.
G
!
The "FinePix COLOR" setting is retained even if you
switch the camera off or change the Mode switch
setting.
G
!
The quality setting is retained even if you switch the
camera off or change the Mode switch setting.

FinePix COLOR

2
2 0 0 1
3 0
1 Press " g " to select the "
press " f " to change the setting.
Press the "MENU/OK" button to confirm the setting.
2
".
- STANDARD : The contrast and color saturation are set to
standard. Use this mode for normal photography.
- CHROME : The contrast and color saturation are set to high.
G
!
Subjects with unpredictable results : Close-up shots of people (portraits)
G
!
Because the effects on the image differ depending on the scene being
shot, shots should be taken in Standard mode as well as this mode. Note
that you may not be able to see any difference on the LCD monitor.
G
!
For shots taken in -CHROME mode, automatic quality adjustment
will be suppressed on Exif print compliant printers.
- B&W : This setting converts the colors in the photographed
image to black and white.
0 2
3
" setting and then
47