Taking Pictures Continuously ([ Continuous]) - FujiFilm FinePix F100fd Owner's Manual

[SHOOTING MENU]
M
ISO ISO
OVER OVER
OVER or UNDER
Example
You can change the white balance for a photographed image
by using colored paper instead of white paper.
MEMO
• In [AUTO] mode, the correct white balance may not be
achieved for subjects such as close-ups of people's
faces and pictures taken under a special light source.
Select the correct white balance for the light source.
• When the flash fires, the white balance (except for
custom white balance) setting for the flash is used.
Consequently, to achieve a particular effect, the flash
mode should be set to [C SUPPRESSED FLASH]
(➝p.58).
• The specified custom white balance is retained until it is
reset. This setting is retained even if the battery is
removed.
• The color tones may vary depending on the shooting
conditions (light source, etc.).
• After taking the picture, check the image color (white
balance).
• Explanation of Terms "White Balance" (➝p.156)
76
Set the exposure
compensation again, using
AUTO(1600) AUTO (1600)
a negative value (–) when
[OVER] appears and a
positive value (+) when
[UNDER] appears (➝p.73).
Taking pictures continuously
([ CONTINUOUS])
Use this mode to take pictures of a moving subject.
SHOOTING MENU SHOOTING MENU
EXP. COMPENSATION EXP. COMPENSATION
PHOTOMETRY PHOTOMETRY
WHITE BALANCE WHITE BALANCE
CONTINUOUS CONTINUOUS
AF MODE AF MODE
SET SET-UP UP
OFF OFF
: [FINAL 12] continuous shooting
: [TOP 12] continuous shooting
h : [LONG PERIOD] continuous shooting
k : [FINAL 3] continuous shooting
f : [TOP 3] continuous shooting
➝
Setting the menu ( p.63)
0
FINAL 12 FINAL 12
TOP 12 TOP 12
AUTO AUTO
LONG PERIOD LONG PERIOD
OFF OFF
FINAL 3 FINAL 3
TOP 3 TOP 3