FujiFilm FinePix F100fd Owner's Manual page 139

Warning Displayed
[CAN NOT SET DPOF] An attempt was made to specify DPOF settings for
an image that is not supported by DPOF.
[r CAN NOT SET DPOF]
[CAN NOT ROTATE] An attempt was made to rotate a movie or an image
shot using a camera other than FinePix F100fd.
[r CAN NOT ROTATE]
• An attempt was made to transmit or save an
[rCAN NOT EXECUTE]
[ CAN NOT EXECUTE]
• An attempt was made to remove the red eye-
[ CAN NOT EXECUTE]
An attempt was made to resave an image that was
[ CAN NOT EXECUTE]
saved with [TRIMMING FOR BLOG].
[PRESS AND HOLD THE An attempt was made to set flash or sound in Silent
DISP BUTTON TO mode.
DEACTIVATE SILENT
MODE]
The camera is not connected to a PC or printer.
[COMMUNICATION
ERROR]
• An attempt was made to send a movie or an
[CANNOT BE
TRANSMITTED] • Transmission was disconnected during IR
Explanation
image that was recorded with another device, or
an image that cannot be played back, or a movie,
with [TRIMMING FOR BLOG].
effect from an image that was recorded with
another device, an image that cannot be played
back, or a movie.
image shot by the camera other than FinePix
F100fd ( is displayed).
communication.
Remedy
DPOF printing cannot be used with this image
format.
These images cannot be rotated by image formats.
• Some image formats or movies cannot be
transmitted or saved with [TRIMMING FOR
BLOG].
• The red eye-effect cannot be removed from an
image that was recorded with another device, an
image that cannot be played back, or a movie.
Images saved with [TRIMMING FOR BLOG] cannot
be resaved.
Flash or sound cannot be set in the Silent mode.
Release the Silent mode to set flash or sound.
• Check that the USB cable (included) is connected
correctly.
• Check that your PC or printer is turned on.
• When using infrared transmission function,
transmit the image data within the camera's or
another device's transmission range.
• The image format is not transmittable.
• A movie can not be sent.
• Do not move the camera out of the transmission
distance. Do not place anything between the
transmitting and receiving devices.
Continued Q
139