Changing The Quality Setting ([ Quality]) - FujiFilm FinePix F100fd Owner's Manual

Changing the quality setting
([ QUALITY])
Use this menu to specify the image size (number of
recorded pixels).
Select the quality setting for the scene being shot.
Z Quality settings in Shooting mode
Quality mode
T F (4000 × 3000)
Printing at up to 10R (25.4 × 30.5 cm/
T N (4000 × 3000)
10 × 12 in.) / A3 size
% (4224 × 2816)
5 F (2848 × 2136)
Printing at up to 10R (25.4 × 30.5 cm/
5 N (2848 × 2136)
10 × 12 in.) / A4 size
3 (2048 × 1536)
Printing at up to 6R (15.2 × 20.3 cm/6
× 8 in.) / A5 size
2 (1600 × 1200)
Printing at up to 4R (10.2 × 15.2 cm/4
× 6 in.) / A6 size
` (640 × 480)
To use for e-mail or web site
Sample uses
Area shot and quality setting
Area shot excluding %
ISO ISO ISO ISO AUTO AUTO(400) AUTO AUTO(400) (400) (400)
12 12/ 31 31/ 2050 12 12/ 31 31/ 2050 2050 10 10: 00 00 AM 2050 10 10: 00 00 AM AM AM
Normal shooting provides an aspect ratio of 4:3 and %
shooting provides an aspect ratio of 3:2 (same aspect ratio as
35 mm film and post card).
MEMO
• The bigger the number of recorded pixels, the better the
image quality becomes. As the number of recorded
pixels becomes smaller, you will be able to record more
frames to a Memory Card.
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• When changing the quality setting, the number of
available frames also changes (➝p.154). The numbers
to the right of setting show the number of available
frames.
• Available [ ISO] or [
change depending on the quality setting.
➝
Setting the menu ( p.63)
Area shot with %
AUTO AUTO
ISO ISO ISO ISO AUTO AUTO(400) AUTO AUTO(400) (400) (400)
12 12/ 31 31/ 2050 12 12/ 31 31/ 2050 2050 10 10: 00 00 AM 2050 10 10: 00 00 AM AM AM
DYNAMIC RANGE] settings
71